 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Previous Datasheet Index Next Data Sheet DISCRETE POWER DIODES and THYRISTORS DATA BOOK D-350 To Order Previous Datasheet Index Next Data Sheet Bulletin I25157/B ST300C..C SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-200AB (E-PUK) 650A Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz It 2 case style TO-200AB (E-PUK) Units A C A C A A KA2s KA2s V s C ST300C..C 650 55 1290 25 8000 8380 320 292 400 to 2000 @ 50Hz @ 60Hz V DRM /V RRM tq TJ typical 100 - 40 to 125 D-351 To Order Previous Datasheet Index Next Data Sheet ST300C..C Series ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 04 08 12 ST300C..C 16 18 20 V DRM /V RRM , max. repetitive peak and off-state voltage V 400 800 1200 1600 1800 2000 VRSM , maximum nonrepetitive peak voltage V 500 900 1300 1700 1900 2100 I DRM /I RRM max. @ TJ = TJ max mA 50 On-state Conduction Parameter I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current 12 ST300C..C 650 (320) 55 (75) 1290 8000 8380 6730 7040 A Units Conditions A C 180 conduction, half sine wave double side (single side) cooled DC @ 25C heatsink temperature double side cooled t = 10ms t = 8.3ms t = 10ms t = 8.3ms t = 10ms KA2s t = 8.3ms t = 10ms t = 8.3ms KA2s No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. I2 t Maximum I2t for fusing 320 292 226 207 I 2 t Maximum I2t for fusing 3200 0.97 t = 0.1 to 10ms, no voltage reapplied (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 rt2 V TM IH IL Low level value of on-state V 0.98 (I > x IT(AV)),TJ = TJ max. 2222222222222 0.74 slope resistance High level value of on-state slope resistance Max. on-state voltage Maximum holding current Typical latching current 2.18 600 1000 mA V 0.73 m (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. (I > x IT(AV)),TJ = TJ max. I = 1635A, TJ = TJ max, t = 10ms sine pulse pk p T J = 25C, anode supply 12V resistive load D-352 To Order Previous Datasheet Index Next Data Sheet ST300C..C Series Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5- On-state Power Loss Characteristics Fig. 6- On-state Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled D-356 To Order Previous Datasheet Index Next Data Sheet ST300C..C Series Fig. 9 - On-state Voltage Drop Characteristics Fig. 10 - Thermal Impedance Z thJ-hs Characteristics Fig. 11 - Gate Characteristics D-357 To Order Previous Datasheet Index Next Data Sheet ST300C..C Series Switching Parameter di/dt Max. non-repetitive rate of rise of turned-on current t t d ST300C..C 1000 1.0 Units Conditions A/s Gate drive 20V, 20, t 1s TJ = TJ max, anode voltage 80% VDRM Gate current 1A, di /dt = 1A/s g r Typical delay time Typical turn-off time s q V = 0.67% VDRM, TJ = 25C d 100 ITM = 300A, TJ = TJ max, di/dt = 40A/s, VR = 50V dv/dt = 20V/s, Gate 0V 100, t = 500s p Blocking Parameter dv/dt IRRM IDRM Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current ST300C..C 500 50 Units Conditions V/ s mA TJ = TJ max, linear to 80% rated VDRM TJ = TJ max, rated V DRM/V RRM applied 23 Triggering Parameter PGM Maximum peak gate power ST300C..C 10.0 2.0 3.0 20 Units Conditions W A TJ = TJ max, t 5ms p PG(AV) Maximum average gate power IGM +VGM -VGM Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage TYP. 200 IGT DC gate current required to trigger 100 50 2.5 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger 1.8 1.1 TJ = TJ max, f = 50Hz, d% = 50 TJ = TJ max, t 5ms p V 5.0 MAX. 200 3.0 10.0 0.25 mA V V mA TJ = TJ max, t 5ms p TJ = - 40C TJ = 25C TJ = 125C TJ = - 40C TJ = 25C TJ = 125C Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied TJ = TJ max D-3533333 To Order Previous Datasheet Index Next Data Sheet ST300C..C Series Thermal and Mechanical Specification Parameter TJ T stg ST300C..C -40 to 125 -40 to 150 0.09 0.04 0.02 0.01 9800 (1000) Units C Conditions Max. operating temperature range Max. storage temperature range RthJ-hs Max. thermal resistance, junction to heatsink RthC-hs Max. thermal resistance, case to heatsink F Mounting force, 10% DC operation single side cooled K/W DC operation double side cooled DC operation single side cooled DC operation double side cooled N (Kg) g See Outline Table K/W wt Approximate weight Case style 83 TO - 200AB (E-PUK) RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) 12 Rectangular conduction Single Side Double Side 0.007 0.012 0.016 0.023 0.036 0.007 0.013 0.017 0.023 0.037 K/W TJ = TJ max. Conduction angle 180 120 90 60 30 Sinusoidal conduction Single Side Double Side 0.010 0.012 0.015 0.022 0.036 0.011 0.012 0.015 0.022 0.036 Units Conditions Ordering Information Table Device Code ST 1 30 2 0 3 C 4 20 5 C 6 1 7 8 1 2 3 4 5 6 7 - Thyristor Essential part number 2222222222222 0 = Converter grade C = Ceramic Puk Voltage code: Code x 100 = VRRM (See Voltage Rating Table) C = Puk Case TO-200AB (E-PUK) 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) 8 - Critical dv/dt: None = 500V/sec (Standard value) L = 1000V/sec (Special selection) D-354 To Order Previous Datasheet Index Next Data Sheet ST300C..C Series Outline Table ANODE TO GATE CREEPAGE DISTANCE: 11.18 (0.44) MIN. STRIKE DISTANCE: 7.62 (0.30) MIN. 25.3 (0.99) DIA. MAX. 0.3 (0.01) MIN. 14.1 / 15.1 (0.56 / 0.59) 0.3 (0.01) MIN. 25.3 (0.99) DIA. MAX. 40.5 (1.59) DIA. MAX. GATE TERM. FOR 1.47 (0.06) DIA. PIN RECEPTACLE Case Style TO-200AB (E-PUK) 2 HOLES 3.56 (0.14) x 1.83 (0.07) MIN. DEEP 6.5 (0.26) 4.75 (0.19) All dimensions in millimeters (inches) 23 25 5 42 (1.65) MAX. 28 (1.10) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics D-3553333 To Order |
Price & Availability of ST300C111
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |